Page 1 of 1

PostPosted: Tue Sep 13, 2005 7:48 am
by artman12us
I am putting in new brake pads. The old pad is glued to a aluminun backing plate. Do I need to break off old pad and glue new one on? what glue do I use? Any help on doing brakes and where to get pads would be appreciated. I AM GROUNDED AND WANT TO GET BACK INTO MY lAZAIR. Thanks Art

PostPosted: Tue Sep 13, 2005 8:36 am
by Guest
Measure your existing pads to see if they are close in thickness to the pads in the link below..... Most planes use these. If your inner (sliding) pad is thicker than 5/16" you will need a different pad set.

http://www.mfgsupply.com/m/c/05-114.html.

Glue new pads on with 2-part epoxy.