Posted: Wed Jan 17, 2007 1:32 pm
Series I (12" diameter) composite prop blades made in two (folding) halves - originally intended for foot launched powered hang glider adaptation but never used. These props were made as single blades with a 10mm dia. steel sleeved hole bonded into the hub. Also included is the mould tool - useable but not pristine. Make an offer - shipping from Ottawa, Ontario, Canada.
Also similar to above, 48" dia folding composite prop blades based on Eppler 197(?)section intended for foot launched powered hang glider - 12 to 16 hp @2200 prop rpm. Can be adapted to Series II Lazair. One hub included, never used. Have 3 sets (6 blades) but no more mould tool - will sell for $100 per blade. Two sets have ½" dia. sleeved bush hole, one set with 10mm (0.394") dia. More details on enquiry.
Also similar to above, 48" dia folding composite prop blades based on Eppler 197(?)section intended for foot launched powered hang glider - 12 to 16 hp @2200 prop rpm. Can be adapted to Series II Lazair. One hub included, never used. Have 3 sets (6 blades) but no more mould tool - will sell for $100 per blade. Two sets have ½" dia. sleeved bush hole, one set with 10mm (0.394") dia. More details on enquiry.