Posted: Mon May 09, 2005 11:04 amPage 1 of 1
Posted: Mon May 09, 2005 11:04 amPosted: Mon May 09, 2005 2:32 pmEvidently the Poly-patch greenhouse does not have a proper adhesive. More than likely it has a silicon based adhesive. Tedlar tape on the other hand with the proper adhesive (acrylic) is for the most-part fuel and oil proof. Anyone who has tried scores of volatile chemicals to remove Tedlar tape reside when recovering can attest to this.
Posted: Mon May 09, 2005 8:44 pmRay, I not sure about hte K & N filters.
Try and find some velocity stacks, that will keep in a lot of the gas/oil mis. in the carb. But seriously contact George Curtis for the proper tapes. It not gonna be cheap but hey it works.
Shorty
Try and find some velocity stacks, that will keep in a lot of the gas/oil mis. in the carb. But seriously contact George Curtis for the proper tapes. It not gonna be cheap but hey it works.
Shorty
Posted: Mon May 09, 2005 10:35 pmI also manufacture original velocity stacks too. I had to as my kit didn't come with any and I knew I absolutely wanted and needed them to keep the fuel from blowing across the wings. Without them there is a vaccuum created as the air passes over the intake when the throttle is brought back that sucks some fuel out and ultimately across the wings.
Ray, if you need a set, let me know and I'll make you up a set for $25 plus shipping.
George Curtis
Ray, if you need a set, let me know and I'll make you up a set for $25 plus shipping.
George Curtis
Posted: Mon May 09, 2005 10:47 pmWoW George those stacks look great ! Imagine that ! Homemade OEM type Rotax 185 V-stacks. Amazing ! Only $25, what a bargain. Ha Ha !
Posted: Tue May 10, 2005 2:25 pmPosted: Tue May 10, 2005 5:16 pmPosted: Tue May 10, 2005 5:55 pm