Posted: Mon Sep 12, 2005 8:04 pm
I an putting new tires on my Lazair III. there is a crack at one bolt
hole and one more crack that goes from bolt hole to rim and in
about 1/8 in. The surface of the rim is not flat leaving some small
space between the halfs, Does any one have any experience with this?
suggestions? thanks Art
hole and one more crack that goes from bolt hole to rim and in
about 1/8 in. The surface of the rim is not flat leaving some small
space between the halfs, Does any one have any experience with this?
suggestions? thanks Art