Harnessing engine Rotax lighting coil power

Share your thoughts, photos and general help to all builders

Postby rayjb60 » Tue Oct 05, 2004 3:12 pm

I wanted to start this thread in order to find out what others might have done to
get power from the lighting coil on the Rotax 185's or similar engine.

The red jack allows electrical power to be extracted from the engine.

Im thinking it might be suitable for a simple tachometer connection, and also for providing power to some strobes so we are more visible to the faster aircraft.

The power is likely AC and Im not sure how many volts or current draw is possible.

Add what you know to this thread and we can all gain some valuable knowledge here for our neat ideas.

Ray
<H5>Nothing is impossible...Even the word tells you Im-Possible!!!</ H5>
User avatar
rayjb60
LazairNUT
 
Posts: 235
Joined: Tue Jun 15, 2004 2:49 pm
Location: Lake Elsinore, CA

Postby ozzie » Wed Oct 06, 2004 3:48 am

hi ray you will find this type of lighting coil on some ag bikes and are used as that to run a light without a battery a basic way to be road legal or find your way back to the barn the globe does not care if it is acca or dacca. the light will brighten and dim with the rpms only when you wish to charge a battery to have stable or constant voltage to powere somthing that needs constant dc power you will have to fit a voltage rectifyer to prevent overcharging and convert to dc. your altanater in your car is ac converted this way if i remember rightley. you will recognize a rectifyer as a small box that is finned to expell the heat that is generated when the bat is charged excess power is converted to heat and expelled via the zenier diode to the heat sink they get quite warm. the ones that are supplied with the bigger rotaxs have been known to be unreliable and boil batteries dry and fry radios a chap here has made a replacment type that is much more stable and most pilots toss the rotax ones and fit his one i don't know if someone has done this on your side of the world maybe a phone call to the rotax expert at ultraflight radio can explain it better or more correctly than i have. ozzie

that was a great video of the lazair flying it took 13 hrs to download even with the accelerator must take forever with normal dialup lucky those who have broadband. well worth watching great countryside i'd forrgotten what GREEN grass looks like very little of it here even in the city now.
BLUE SKIES AND FULL TANKS
User avatar
ozzie
LazairNUT
 
Posts: 403
Joined: Fri Jan 16, 2004 4:56 pm
Location: australia

Postby flyalaz » Tue Jan 18, 2005 12:12 am

Lighting coil is 6v ac out. Could possibly use bridge rectifier to change to 6v dc, and use voltage doubler to get 12v out. Not much current available for higher consumption rates.

Cheers
You do not have the required permissions to view the files attached to this post.
User avatar
flyalaz
LazairNUT
 
Posts: 352
Joined: Tue Sep 30, 2003 3:18 pm
Location: Montreal, Canada

Postby Guest » Tue Jan 18, 2005 1:36 am

or you could link the two engines and get 12 volts
Guest
 

Postby lazair3ca » Tue Jan 18, 2005 7:45 am

My plane was equiped with a tach connected to the lighting jack. I do not have the tach setup right now. I hope to reconnect it in the spring. Perhaps we will have some time while the engine is on the test stand to see what current can be drawn from the coil and still maintain the 6 vac. George has left the coil off so it will be later in the year.
Bill
C-IHMS
User avatar
lazair3ca
Popular Lazair Member
 
Posts: 60
Joined: Tue Sep 30, 2003 7:48 am
Location: Ottawa, Canada

Postby Shannon » Fri Mar 04, 2005 12:27 pm

Rotax 185 info
You do not have the required permissions to view the files attached to this post.
Shannon
SHANNON
 
Posts: 1082
Joined: Thu Jan 15, 2004 10:05 pm

Postby flyalaz » Sat Mar 05, 2005 7:48 pm

An interesting term there! Caloric values- Is that is the heat range of the plug? And the manual is from the pump? I've Never seen it before.

karl
User avatar
flyalaz
LazairNUT
 
Posts: 352
Joined: Tue Sep 30, 2003 3:18 pm
Location: Montreal, Canada


Return to Re-Building tips and info

Who is online

Users browsing this forum: No registered users and 4 guests

cron