Brake cables

Share your thoughts, photos and general help to all builders

Postby artman12us » Tue Sep 20, 2005 7:36 pm

Does anyone have a source and part# for original brake cables? Thanks Art
artman12us
Popular Lazair Member
 
Posts: 30
Joined: Wed Aug 11, 2004 10:14 pm

Postby ozzzie » Wed Sep 21, 2005 3:02 am

just a tip on cables, when i replaced mine i fitted a larger outer with a teflon liner in it and used a stainless solid wire. this has been a huge improvement on the old style. they move so easy now. they resist dirt build up and never need lubericating. cost was $40 to do both engines. you can also get the adjusters to suit the bigger style with the same size thread. i'm sure these will allow more precise braking. you can buy all the parts off the roll. ozzzie
ozzzie
Lazair Newbie
 
Posts: 1
Joined: Wed Sep 21, 2005 2:50 am

Postby JPXman » Tue Nov 15, 2005 2:40 pm

a tip that was given to me by an old dealer was to lubricate brake and throttle cables with automatic transmission fluid! never freezes, and adds that little bit of lubrication to make things silky smooth.

Tyler
User avatar
JPXman
LazairNUT
 
Posts: 625
Joined: Sun Nov 02, 2003 10:15 pm

Postby Chappy » Tue Nov 15, 2005 10:17 pm

Bicycle repair shops usually stock the cable housing with the plastic liner. Most larger hardware stores have the solid wire. Even stranded wire works better in the cable housings with the plastic liners, especially when they get a little older, and require less lubrication than the cheaper housings without the liner.

Chappy.
Chappy
LazairNUT
 
Posts: 330
Joined: Wed Jan 28, 2004 9:57 pm
Location: Northern Virginia, USA


Return to Re-Building tips and info

Who is online

Users browsing this forum: No registered users and 5 guests

cron