Carbs

General Messages Post you pics as well

Postby lazairkid » Tue Feb 28, 2006 11:24 am

:huh: Hey guys,

I need some info from you guys that are flying. What carbs are you
using and how good are they working. What problems are you encountering.
I have my solo 210's mounted. Lonnie Prince said my props will go out this
week so carbs are all I lack. I'm also working on a muffler system like what
you guys use with the 185's, but I have my solo mufflers if I have to use them.
I was told that the Walbro, tillotson carbs have to be adjusted every time
before flight. how true is this!!!!!!!
Some of you guys know Alex Varv from Aero Cors-air, he recommended
using the Walbro 37c , are any of you guys using that carb.
Thanks Lazairkid :unsure: :unsure:
You do not have the required permissions to view the files attached to this post.
lazairkid
LazairNUT
 
Posts: 111
Joined: Fri Sep 26, 2003 8:39 pm
Location: Summerville S.C.

Postby lazairkid » Tue Feb 28, 2006 11:28 am

more pics
You do not have the required permissions to view the files attached to this post.
lazairkid
LazairNUT
 
Posts: 111
Joined: Fri Sep 26, 2003 8:39 pm
Location: Summerville S.C.

Postby ozzie » Tue Feb 28, 2006 3:51 pm

that redrive mount is a work of art, can you take some close ups of it including the rear. thanks ozzie.
BLUE SKIES AND FULL TANKS
User avatar
ozzie
LazairNUT
 
Posts: 403
Joined: Fri Jan 16, 2004 4:56 pm
Location: australia

Postby uscgairdale » Tue Feb 28, 2006 6:39 pm

Thomas,

Your engines are looking sweet dude.

Dave
User avatar
uscgairdale
LazairNUT
 
Posts: 479
Joined: Thu Dec 02, 2004 2:30 pm
Location: Camden, NC

Postby Shannon » Tue Feb 28, 2006 7:55 pm

I'm thinking you need Tillotson 181s for Solos. Ask Alex or Chris Bowles at Southern Skies Paramotor.

Shannon
Shannon
SHANNON
 
Posts: 1082
Joined: Thu Jan 15, 2004 10:05 pm

Postby lazairkid » Tue Feb 28, 2006 9:13 pm

Shannon,
I did,
Alex said to use Walbro 37c's like what on the cors-air engine
Chris Bowles recommends Bing 84 32mm's
Tillotsons can be used too.
That is way I'm asking you guys in the field what works for you.
Thomas
lazairkid
LazairNUT
 
Posts: 111
Joined: Fri Sep 26, 2003 8:39 pm
Location: Summerville S.C.

Postby lazairkid » Sat Mar 04, 2006 7:15 pm

:D :D Hey guys,
I got the props from Lonnie Prince today, man there nice. 44/23's :P :P
You do not have the required permissions to view the files attached to this post.
lazairkid
LazairNUT
 
Posts: 111
Joined: Fri Sep 26, 2003 8:39 pm
Location: Summerville S.C.

Postby flyalaz » Sat Mar 04, 2006 7:25 pm

Those are really nice looking props! Are they epoxy painted like the other ones?
I guess you'll have to delay buying that new house for a while! LOL

Very nice looking motor installations too! Should be one heck of a combination.

Karl
User avatar
flyalaz
LazairNUT
 
Posts: 352
Joined: Tue Sep 30, 2003 3:18 pm
Location: Montreal, Canada

Postby lazairkid » Sat Mar 04, 2006 7:29 pm

There the wood and fiberglass like what the other guys have,
There wt. is less than a pound each.
They painted and clear coated them at the factory
Thomas
lazairkid
LazairNUT
 
Posts: 111
Joined: Fri Sep 26, 2003 8:39 pm
Location: Summerville S.C.

Postby lazairkid » Sat Mar 04, 2006 7:35 pm

Karl here is a pic of the finished assembly, I didn't see anything wrong with the rivets on ether side.
You do not have the required permissions to view the files attached to this post.
lazairkid
LazairNUT
 
Posts: 111
Joined: Fri Sep 26, 2003 8:39 pm
Location: Summerville S.C.

Next

Return to Lazair - General

Who is online

Users browsing this forum: No registered users and 6 guests